What is AutoDiscover and how it works in Exchange 2007 & 2010. Internally and Externally?
Aditya Mediratta
↧
AutoDiscover working Internally and Externally?
↧
Exchange 2013/07 cannot connect via outlook or send emails
Hi Everyone
I have recently installed a Exchange 2013 on Server 2008 R2 into my production environment which already has an Exchange 2007 server running off Server 2003. I have made sure all pre-requisites for co-existence mode were installed.
I have created test mailboxes on my 07 exchange which I successfully migrated to 2013 however once migrated I am no longer able to send from these mailboxes or connect any outlook client to them. I am able to receive and access the mailbox via 2013 owa.
I have researched and created new send connectors which for some reason no longer appear in the queue viewer. I am having the same problem as others where mails sent via owa find their way into the drafts folder and never submit to the queue.
I can confirm the below:
All exchange services are running
Checked DNS settings on the Exchange 2013 server
Two problems I am trying to resolve here:
Sending Emails both internal and externally
Outlook connections be able to connect outlook clients to the new exchange server
↧
↧
Recover email Deleted by Managed Folder mailbox Policy
Can we recover email if it has been Deleted by Managed Folder mailbox Policy? if yes how and if no why ? Please suggest.
Aditya Mediratta
↧
Exchange 2013 Multi Role Boot Sequence
Hi there,
I was wondering if in a Multi Role Setup of Exchange 2013 there is a guideline in what order you should reboot your Roles in case you need to reboot?
For Example:
1. restart Mailbox role
2. restart CAS role
or
1. restart CAS role
2. restart Mailbox role
Also is there a guideline rebooting Exchange 2013 together with your DC's? I tried searching online and in Forums, but no luck yet. Kind Regards...
↧
Exchange PowerShell Script to enable in Place hold for multiple users using Text File
I wish to run an Exchange PowerShell Script to enable in Place hold for multiple users using Text File. I want to be able to specify the users, not search all users. I also need to do this via PowerShell not via the EAC.
↧
↧
exchange 2013 owa error 400 Bad Request
When I try to access OWA from any client I get an HTTP 400 Bad Request error.
Accessing ECP works fine.
I have recreated the virtual directories - still no good.
IE returns this error.
Firefox says "Firefox has detected that the server is redirecting the request for this address in a way that will never complete".
What is wrong?
↧
Exchange 2013 SP1 co-existence Exchange 2010 SP3 Roll up 4 Out Of Office not working for Exchange 2010 mailboxes
Hello,
We are currently running Exchange 2013 SP1 co-existence with Exchange 2010 SP3 Rollup 4.
Our Outlook Anywhere and OWA are pointed towards Exchange 2013 CAS servers.
User mailboxes are still on Exchange 2010.
Outlook Anywhere with Exchange 2010 mailboxes are able to connect via Outlook 2010.
The only issue is when Outlook Anywhere is being used from Internet or from Internal network and user goes in Outlook 2010 -> File -> Automatic replies get the following error: -
"Your automatic reply settings cannot be saved. The server might be unavailable, or your automatic reply message might have exceeded the size limit on the server"
This only occurs if connection goes via Exchange 2013 SP1 CAS server. It was working before and it seems it just broke down since we upgraded to Exchange 2013 SP1. In HTTPProxy EWS logs on Exchange 2013 SP1 CAS server I see this when I re-create the issue on Outlook 2010.
=================================
"2014-03-18T12:46:48.135Z,c64653f6-6b52-4657-8b3b-f9f1f5ece965,15,0,847,30,,Ews,messages.domain.com,/EWS/Exchange.asmx,,Negotiate,True,domain.com\id2013,,Sid~S-1-5-21-323741388-3570301916-4168597275-99094,Microsoft Office/14.0 (Windows NT 6.1; Microsoft Outlook 14.0.7113; Pro),10.90.234.35,VPLXCAS01,400,,,POST,Proxy,exch2010casserver.domain.com,14.03.0123.000,IntraForest,WindowsIdentity,,,,5423,,,,2,0,,0,,0,,0,0,0,0,1,0,,,,,,3,0,,2,,4,5,,,CorrelationID=<empty>;BeginRequest=2014-03-18T12:46:48.135Z;ProxyState-Run=None;DownLevelTargetHash=4/4/6;ClientAccessServer=exch2010casserver.atkearney.com;ResolveCasLatency=0;ProxyToDownLevel=True;BeginGetRequestStream=2014-03-18T12:46:48.135Z;OnRequestStreamReady=2014-03-18T12:46:48.135Z;ProxyState-Complete=ProxyRequestData;,StreamProxy=StreamProxy-Request-None;HttpException=Cannot find the appropriate SOAP header or body.;"
=========================
I have checked and double checked using https://testconnectivity.microsoft.com/ and there are no issues in "EWS".
It works fine if user mailbox is on Exchange 2013 Sp1.
I was wondering if anyone has co-existence of Exchange 2013 SP1 and Exchange 2010 SP3 could you please test Exchange 2010 mailbox via Outlook Anywhere and see if you could re-create this issue. After spending a week on this I wonder if it is some sort of bug in Exchange 2013 SP1.
Thanks,
Raman
↧
Setting up Exchange 2013 server (Vmware workstation)
I'm very new at this, and need some advice.
I got 1 AD server, who is my domain controller.
And on the other server i have tried to install Exchange 2013. But dosen't work ofc.
Seems like i have to log on to the Exchange server with Enterprise admin(?)
But that doesen't work. I get this message: there are currently no logon servers available to service the logon request.
I have configured DHCP.
Any advice for a nub?
↧
Report by mailbox size and filter Powershell
HI all,
I just need help putting together a script that gives me a report based on mailbox size and domain used. So for instance, all mailboxes under domain1.com and the mailbox size of that user
I have found a script that will give me user names and mailbox size
Get-MailboxStatistics-Server'SERVERNAME'|where{$_.ObjectClass-eq “Mailbox”}|Sort-ObjectTotalItemSize-Descending| ft @{label=”User”;expression={$_.DisplayName}},@{label=”TotalSize(MB)”;expression={$_.TotalItemSize.Value.ToMB()}}-auto>>“c:\Temp\mailbox_size.txt”
And one that gives me users filtered by domain name:
Get-Mailbox -ResultSize Unlimited | Select-Object Name, PrimarySMTPAddress, @{Name="EmailAddresses";Expression={$_.EmailAddresses -cmatch "smtp"}} | Where-Object {($_.PrimarySMTPAddress -like "*domain3.ch*") -or ($_.EmailAddresses -like "*domain3.ch*")} > c:\mailboxes.txt
But I just cant figure out how to get them to work together, thanks for any and all help!
↧
↧
Exchange 2010 one user 2 mails
good day
I needhelp with thismy difficulty
I havean Exchange 2010
And Ihave theneed to changetheemailsfrom different users
I leavethe example
Anto.manueluserwith theemailAntonio.manuel@contoso.comwill haveto be changed tothe addresspm @contoso.With
Butfor 6 monthsallemails sent toantonio.manuel@contoso.commust receive
a message withthe indicationto send mailam@contoso.com
I needhelp with thismy difficulty
I havean Exchange 2010
And Ihave theneed to changetheemailsfrom different users
I leavethe example
Anto.manueluserwith theemailAntonio.manuel@contoso.comwill haveto be changed tothe addresspm @contoso.With
Butfor 6 monthsallemails sent toantonio.manuel@contoso.commust receive
a message withthe indicationto send mailam@contoso.com
↧
Exchange ECP \ OWA not working after SP1 Upgrade
Hi
After exchange server 2013 sp1 was applied
owa ecp etc stopped working the logon screen and website come up but after that redirects to page below with
with error
This error (HTTP 500 Internal Server Error) means that the website you are visiting had a server problem which prevented the webpage from displaying.
THanbks
↧
Replication Mananger Exchange (2012) Interface "Log On As account"
We currently have Replication Manager Exchange Interface service using the domain admin account. This service executes Exchange 2007 or Exchange 2010 commands for Replication Manager.
We would like to change this. I am not certain why this service has domain admin rights. I cannot find any white papers stating this is a requirements. All other Exchange services use Local System or Network Service.
Will there be any issues if we change this to use either Local System or Network as log on as for this service??
Thanks
↧
rpc over https on move and download only 5 mbps speed
exchange 2013 sp1,win 2012
protocol rpc/http, SSL- yes, avg response 40
10 mailboxes with size 25 GB, RAM 12 Gb.
No matter intranet or external network
I don't know, it is by default or something with configuration.
Then i add new mailbox to outlook in cached mode then 1 GB download speed are about 5-8 mbps. So 5 gb and more need to waiitttt...
Proccesor usage are about 5-10% for store.exe when start download mailboxe.
Then i move messages form local outlook pst to exchange- the same slow move.
No matter outlok 2013, 2010, 2007 all the same from different pc.
test local network data copy to server and it is normal.
test imap caching- normal fast.
↧
↧
Exchange 2013 Performance Monitor Data Collector Sets
I've noticed that the Exchange 2013 install created two data collector sets within Performance Monitor:
- ExchangeDiagnosticsDailyPerformanceLog
- ExchangeDiagnosticsPerformanceLog
These sets are creating daily log files saved in C:\Program Files\Microsoft\Exchange Server\V15\Logging\Diagnostics\DailyPerformanceLogs that are about 500MB in size, which are filling up our system volume.
I've tried stopping them, but they get restarted automatically. I also tried deleting them, but they get recreated automatically. Is there a way to disable these? We have a 3rd party tool that we use for performance monitoring and would like to avoid having to delete these log files on a regular basis to keep our system volume from filling up.
As a workaround, I've changed the path where the log files get saved to a non existent drive letter, but would still like to disable the Data Collector Sets completely.
Thanks,
-Cory
↧
Exchange Server 2013 Port details
In technet and blog exchange 2010 network port requirement are available. But i didn't found Exchange server 2013 network port requirement
Please give me the link and details of Exchange 2013 network port requirement.
↧
Exchange 2013 IIS links to OWA and ECP broken
The issue started earlier today when in my production (three people on it) exchange 2013 i made a change to the default website while logged into ecp.
I pointed https://website/owa under OWA and https://website/owa under ECP.
I tried to remove and re- add the directories though exchange shell (locally) without any success.
This is what i get when i try to log into https://website/owa
https://website/owa/?bO=1 the tab just says loading
when i try
https://website/ecp/ i get to the exchange admin center enter user name and password
then i get https://website/owa/auth.owa and its a blank page
the ssl wildcard certificate is in place.
Any help is appreciated.
↧
Exchange 2007 to 2013 migration. VM Outlook Crash
We are migrating from Exchange 2007 to Exchange 2013. I moved a test group of 8 users to 2013. 6 or the 8 are on VMWare virtual machines. The one on a physical machine is okay. 1 of the remaning 6 is able to open their Outlook 2010
client and interact without issue. The other 5 can open their client, but once they try to create a new email, or reply to a message their client freezes and will no longer function. The same is true for the calendar. They can switch to their
calendar. but if they try to open a calendar appointment or create a new appointment the client again goes to a 'Not Responding' state and will not return to a running state. The application has to be killed. Outlook has been tested using both
ThinApp and Unidesk with similar results. Seeking answers.
↧
↧
RWS.Proxy and ECP.Proxy health checks, localhost, and SSL
RWS.Proxy and ECP.Proxy health sets are both failing. In both of the errors, I find the following:
[000.000] Starting HTTP request task [000.000] Waiting 59000 ms [000.000] Issuing GET against https://localhost/ecp/ [000.000] Awaiting GET response [000.000] Performing SSL validation [000.000] Performing SSL validation [000.000] Failed with exception: The underlying connection was closed: An unexpected error occurred on a receive.
[000.000] Starting HTTP request task [000.000] Waiting 59000 ms [000.000] Issuing GET against https://localhost/ecp/ReportingWebService/ [000.000] Awaiting GET response [000.000] Performing SSL validation [000.000] Performing SSL validation [000.000] Failed with exception: The underlying connection was closed: An unexpected error occurred on a receive.
We require SSL on all connections. We use a third party certificate with multiple SANs. Since the probe is trying to use https://localhost, it fails because the name doesn't match.
I figure I have a few options: first, is there a way to change the URL that the probe uses to check. This seems to me to be the 'rightest' way I could fix this. Second could I alter the binding of the site so that the localhost hostname uses a dedicated, self signed, trusted cert? Last, is there any way to simply disable the specific probes? We're a single server low volume setup and I'm not convinced that I need the probes anyway.
IS this a common issue? Outside of the warnings that SCOM throws at me, it is also causing a large volume of logs to be generated.
Justin Cervero - MS Enterprise Admin - Appalachian State University
↧
Exchange 2013 autodiscover prompt
Hi,
Over the weekend i installed SP1 on our exchange 2013 DAG. Now users are getting an authentication prompt when opening outlook. This didn't happen prior to SP1.
When testing email auto configuration in outlook it prompts for auth, typing in my creds it goes through ok.
It looks like it getting a 401
I'm not sure what has changed but its very frustrating.
Any Ideas?
↧
How to find user last mail sent time and date in exchange server 2010
Hi All,
How to find all users last mail sent time and date in one database,
please help me on this.
Thanks in Advance
↧